Clik here to view.
Coloring SKILL AppForm fields
Hello All, I have already searched the forum and all discussions were stating that we can't change the background or the color of the fields. While I was looking for inspiration for a report type form...
View ArticleClik here to view.
RE: eye diagram problem
Thanks for the quick answer. I use the analog design environment to design the digital circuits I need. I run the transient analysis of the ADE using spectre APS. Later I plot the results through the...
View ArticleClik here to view.
RE: Coloring SKILL AppForm fields
Stoyan, It's possible in ADE because they're using native Qt fields rather than hi widgets. This is done for certain situations where a more complex UI is needed - essentially the Qt code is...
View ArticleClik here to view.
RE: Coloring SKILL AppForm fields
Andrew, Thank you. I was supposing that might be the answer, but had to ask. Regards, Stoyan
View ArticleClik here to view.
RE: How to put via in the center of BGA pins
thanks，sir. yes, the distance a is not the same as distance b. do you means it is not proper to using FANOUT in this case? and what is the proper command in this case? i am afraid it is not exact...
View ArticleClik here to view.
saveNetlist option changing view to functional from schematic- Innovus to...
Hello All, I am performing an LVS run using Calibre. For this, I imported the stream/gds file and the the verilog file after my backend flow (Innovus). The .v file was converted to a SPICE netlist (not...
View ArticleClik here to view.
Back Annotation of Segmented Resistors
We have a situation where a single resistor device is placed in a schematic. Then in layout, the designer segmented the resistor into two series resistors. The device has a CDF parameter called...
View ArticleClik here to view.
Specifying options for leMarkNet() with SKILL interactively
Did quite some search but found no solutions on this one. I'm trying to set the following variable so leMarkNet() would prompt the users which layer to start tracing, when multiple shapes/nets exist at...
View ArticleClik here to view.
RE: dynamic parameter in SpectreMDL
Hi Andrew, Thank you for the response and CCR. Actually, my circuit intention is not to measure the temperature as such. I was just using it to debug. And since the values are not updated and the...
View ArticleClik here to view.
3nm Cadence and imec
I started Breakfast Bytes on 8th October 2015, my first day back at Cadence. The very first (real) post was Cadence and imec Announce World's First 5nm Tapeout . I had to find out what I could about...
View ArticleClik here to view.
RE: Adding Multiple values to single field in CIS database
Im using orcad CIS 17.2. Its not working for other fileds also. Any thing need to set at the time of adding fields?
View ArticleClik here to view.
RE: Connecting component body to ground on smd board
Hi Paul, that's the exact info i needed, and as it often is, a silly problem has an easy solution. Having already placed the components, i tried creating a polygon and traces in a manner similar to...
View ArticleClik here to view.
RE: Adding Multiple values to single field in CIS database
There have been a number of updates since the initial Base Release of 17.2 so "simply" OrCAD CIS 17.2 is hardly the "exact version", current version is 17.2-2016.s035 and the multi-value seems to be...
View ArticleClik here to view.
RE: Adding Multiple values to single field in CIS database
I think this will help. I can able to choose symbols like the figure you posted. Mfg part number, EN etc I cant do it like that.
View ArticleClik here to view.
RE: Specifying options for leMarkNet() with SKILL interactively
Duo, The whole point of leMarkNet() is that it doesn't need interactions with the user. So that's not going to prompt you. If you want it to prompt you, you'd have to continue using the "Hi" version of...
View ArticleClik here to view.
RE: Back Annotation of Segmented Resistors
Hi Shane, If you are simulating the DSPF by including the DSPF from the Setup->Simulation Files form, then there's no "back annotation" involved. That's the recommended route, rather than using...
View ArticleClik here to view.
RE: saveNetlist option changing view to functional from schematic- Innovus to...
Kashif, This question appears to be covering a number of different areas - and is not entirely clear because the flow used wasn't really described. Anyway, some points: Issues with Calibre LVS aren't...
View ArticleClik here to view.
how to identify spectre simulator version from SKILL?
Hi there, How can I identify the version of spectre simulator ? IC version >= 6.1.5 Assumption is the simulator is sent (session loaded in ADE-L). The only thing that I have in mind is to call the...
View ArticleClik here to view.
How to Auto Insert Board details like a PCB number etc into a design
Is it possible to add links in an Allegro design that automatically link to the variables in a projects atdm.ini file so that board numbers/artwork numbers and revisions are automatically kept aligned?...
View ArticleClik here to view.
RE: how to identify spectre simulator version from SKILL?
Hi Marcel, I don't think there's any public (or even private) function that provides that. Most of the stuff in ADE that is version-specific uses a capability called "feature files" which are picked up...
View Article