Hi Kawai, You can use: envSetVal("adexl.simulation" "ignoreDesignChangesDuringRun" 'boolean t) in your .cdsinit (note, the CIW would be insufficient) or: adexl.simulation ignoreDesignChangesDuringRun boolean t in the ~/.cdsenv (typically this needs to be your home dir). This enables another setting which generates a single netlist for all points and then includes it in each individual run. The effect of ignoreDesignChangesDuringRun is to run netlisting up front, so be aware that this will lead to a delay before simulations start for big designs. Note that the individual setting singleNetlistForAllPoints is not recommended on its own - there are some issues with this which mean that the netlist can get messed up sometimes - so we recommend you use the ignoreDesignChangesDuringRun setting instead which achieves the same thing. We have new Extracted view format coming in EXT18.2 (out soon) and IC618 (due out October) which should also help significantly too. Regards, Andrew.![]()
↧