Clik here to view.
How to Pitch a Journalist
In the early part of my career, I was an engineer or an engineering manager. Then, I moved into operational management and marketing, which meant I spent a fair bit of my time talking to journalists....
View ArticleClik here to view.
Release memory after a function is completed
Hi all, Assume that we have a dummy test function which its definition is: procedure( test() let( (x) x = list( 2 3 ) ) ) If I run the profiler for this procedure I see that the total memory that have...
View ArticleClik here to view.
RE: Release memory after a function is completed
Hi Chris, You generally do not need to worry about this, as the system will garbage collect automatically as it needs to. Essentially it keeps a pool of each kind of object (list cells in this case)...
View ArticleClik here to view.
RE: Release memory after a function is completed
Hi Andrew, In a way, this example is not so far from the reality, but thank you for the answer. Sincerely, Chris
View ArticleClik here to view.
RE: Symbol and layer embedding requirements do not match.
I got it to work with doing a *.pad fix with the db doctor tool, the padstack were too old and couldn't be opened individually. I place and the footprints look great.
View ArticleClik here to view.
RE: Unable to import psm path
I did the update to the pad stacks too and I am able to place everything in the library. thank you all for all your help.
View ArticleClik here to view.
RE: Multiple flight wires to symbol terminal
Hi, Andrew, I have included a picture of what is going on. The first shows two flight lines/wires connecting to the power source V1. If we move V1 down a little bit we produce the second picture, which...
View ArticleClik here to view.
RE: Create a symbol from layout
I have also attached the schematic for understanding the pin configuration
View ArticleClik here to view.
RE: Create a symbol from layout
Two questions: What views do you have for the MoM cell (presumably called NM_V1_23_07_can)? Perhaps show the library manager contents for that cell? What does the auCdl simulation information look like...
View ArticleClik here to view.
RE: Assura selected rule checking
Hi Quek, I have the similar doubt on it. "Enable Limit DRC" can only used to limit rules based on layers.I have 200+ DRC rules and they are classified to different classes based on the priority....
View ArticleClik here to view.
RE: Create a symbol from layout
1.In the first situation when i have created a symbol by Keysight Momentum-Virtuoso tool the following views are: ads auLvs layout momentum mommdl spectre symbol then i am copying the symbol view and...
View ArticleClik here to view.
RE: Variants: why all attributes of a component are visible?
I found this environment variable "CDS_VARIANT_PROP_VIS" in Cadence Help and it seems the responsible of my problem (all attributes that appears in the schematic are "variant properties"). I have added...
View ArticleClik here to view.
RE: Assura selected rule checking
Hi harisps Assura's "Limit DRC" function can be used to limit the number of DRC rules based on input layers, output layers, message and cmd. You can refer to $ASSURAHOME/doc/assurauser/assurauser.pdf...
View ArticleClik here to view.
DBID of overlapping components
Hi, can you please help me with one more issue. I need to get dbids of overlapping components in design. Thank you in advance for any advice.
View ArticleClik here to view.
ITF: CFETs and New Interconnect
At the imec technology forum (ITF) held the day before SEMICON West opened, two of the presentations were about future technologies, one focused on the FEOL, front-end-of-line, meaning the transistors....
View ArticleClik here to view.
RE: Create a symbol from layout
OK, you have two choices (both require you to edit the "Base" CDF (you're showing the Effective CDF above - the Base CDF is necessary if you want to save to disk and the CDL netlister to run in...
View ArticleClik here to view.
RE: Is it possible show origin in Allegro
You could also go to Setup, Design Parameters, Display tab, then on the righthand side under Enhanced Display Modes, check the box next to Design Origin.
View ArticleClik here to view.
RE: Include CDF callback parameters in netlist
I managed to find the kit (would have made it easier if you'd actually given a link - it's here ). The simple answer is no - since it runs completely outside Virtuoso, it wouldn't be able to see the...
View ArticleClik here to view.
Mass Texting Service | TheTexting
It can support flippancy from understudies. A kindred educator I know works in a region where instructors are urged to connect with understudies on a service called Remind. Instructors convey mass...
View ArticleClik here to view.
RE: Create a symbol from layout
The ansCdlCompParamPrim for netlistProcedure and change the model name to device name were useful for creating netlist from schematic and now the subcircuit is in schematic. Due to checking LVS when...
View Article
