Prashant, Apologies about your post going into moderation - it was the repeated use of awvAnalog2Digital which made the system automatically think it was spam (repeated words do that). Anyway, it's not entirely clear what you want to measure, but I suspect you may want to convert the bus back into an analog signal (just a single analog signal for the entire bus representing the bus value as a voltage) and maybe measure its settling time to find when it stabilises (you may need to clip it to just look at the final value you're expecting). Then subtract that from the point where the other signal (op_ko) crosses the threshold. Something like that... Regards, Andrew![]()
↧